New tutorial from Rhonda 'You give me fever' ptu

Awesome new tutorial from Rhonda @ Rhonda's Rockin' Designz.

Created using my template #58

Click HERE to find this and many other fantastic tuts from Rhonda.

New tutorial from Rhonda.. 'Fun In The Sun' Ptu

Super cute new tutorial from Rhonda @ Rhonda's Rockin' Designz.

Created using my Template #48 and 1 of my favourite tubes by Laguna.

You can find this fabulous tutorial  HERE 

FTU Gone Fishing

This tutorial was written by myself. This tag is my own idea and creation.

Any similarity to any other tutorial or tag is co incidental.

Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed

Ftu Scrap kit 'Magic of the Ocean' by Graphics of Fantasy Designs  HERE

Tube. I have used 'Kitten and Goldfish by Laguna  Picsfordesign.com

Mask 2 set 135 by Rachel Designs  HERE

Save to mask folder.

No Filters used. 

Open a new image 700x700.

Starting with the mask layer. From kit c/paste paper 4. Resize to 90%.

Load mask from disk - fit to layer.

In layer palette, delete mask and merge group. 

Resize to 90%.

From kit c/paste Element 85 Rope resized to 80%. Rotate right 90 degrees.

Using magic wand tool click in the centre to float the inner.

Selections - Modify - Expand by 4.

From kit c/paste Element 28 Fishing net resized to 70%. Move below Rope in layer palette.

Move the net around until you are happy with  how it looks within the Rope frame.

Selections - Invert - Delete - Select none.

Duplicate Net layer. Change blend mode of top copy to Multiply. Merge down.

Drop shadow the rope layer and again merge down.

Go to Effects - Image Effects - Offset . Change vertical offset to 20 and apply.

Copy and paste your chosen tube. Position roughly centre of canvas. You can jig it around to your liking as the other elements go on. D/shadow. 
Now lets add some elements.
D/shadow as you go...

44 Sand. Resized to 80%.  Position along the bottom behind your tube layer. Duplicate. Go to bottom copy and Adjust - Blur - Gaussian blur 2.

87 Water Ripple. Resized to 80%. Rotate right by 2 degrees. Place at bottom above the sand. Just slightly lower down the canvas.

26 Grass. Resized to 60%. Position at the left side of tag, above the rope behind tube layer.

18 Paper boat. Resized to 30%. Place left above grass, behind tube.

82 Starfish. Resized to 20 %. Bottom left above boat layer.

138 Mosquito. Resized to 20%. Position on the left above the grass. Duplicate. Mirror the copy and position elsewhere on the grass. Merge down so that both insects are on the same layer. Duplicate again to make them stand out more.

58 Mooring Post. Resized to 50%. Place on the right side of the canvas behind tube layer.

69 Rocks/Grass. Resized to 35%. Bottom right above Mooring post. Behind tube.

125 fishing Rod. Resized to 55%. Image -  Mirror. Position on the right above grass as though its resting against the mooring post.

68 Fish on twine. Resized to 25%. Bottom of tag behind tube above water.

Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo

Same tag using the artwork of Eskada also at Pics for design 

Tags by Silvia

Animated Tag by Betsy

New Tutorial by Rhonda 'The Raven' Ptu

Rhonda @ Rhonda's Rockin Designz has been working her Psp magic again and created this stunning new tag/tutorial using my template#15. Beautiful job Rhonda thank you again for mine.You can find her tutorial HERE

FTU Eastern Beauty

This tutorial was written by myself. This tag is my own idea and creation.

Any similarity to any other tutorial or tag is co incidental.

Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed

Ftu scrap kit 'Desert Rose' by Graphics of  Fantasy Designs  HERE

Tube Of Choice. I have used 'Magic travel book' by Misticheskaya at  Pics For Design

Font used Talismanica

Filters Used 

Mura's Meister - Copies

PhotoEffex - Scanlines

Open a new image 700 x 700.

From kit c/paste frame 6 and resize to 70%.

Using magic wand tool click in centre of frame to float inner.

Selections - Modify - Expand by 5.

From kit, c/paste the masked desert image (located in the papers folder) Move below frame layer.

Selections - Invert - Delete - Select none.

Duplicate the desert image, d/shadow frame, merge visible.

C/paste Element 42 - Palms. Resize to 50%. Position left of canvas behind frame. Duplicate and mirror copy to right. Merge both layers. D/shadow

C/paste Element 4 - Sand Hills. Resize to 65%. Position Bottom left of Image above the frame. Duplicate and Mirror copy to the right.

This is where we should be at this point.

C/paste Element 56 Foliage. Resize to 30 % and rotate right by 90 degrees.

Apply Mura's Copies - Encircle. See settings below.

Now go to Effects - Image Effects - Offset and change the horizontal value to -60 this will position the encircle to the left.

Duplicate layer and mirror the copy to the right. Merge down and move your merged layer behind all other layers at the bottom of your layer palette. 

Duplicate again. Go to Adjust - Hue and Saturation - Colorise. Change the colour of the layer to tie in with your chosen tube. I changed mine to Hue 230 Saturation 76.

Resize layer to 98%.

Now go back to the original Green copy and apply PhotoEffex - Scanlines.

Settings below.

 C/paste your tube.  Position it off centre more towards the right of the image. D/shadow.

Continue to build up your tag using desired elements from kit. D/shadow as you go. 

I used...

Element 40 Cushions. Resized to 50%. Position to the bottom right behind tube layer.

Element 18 Perfume Bottle. Resized to 50%. Bottom right  above Cushions behind tube layer.

Element 22 Blue Perfume Bottle. Resized to 30. Adjust - Hue and Saturation - Colorise.

Same settings as used for Encircle. Position bottom right above Perfume Bottle.

Element 20 Lillies. Resized to 35%. Rotate right by 25 degrees. Bottom right behind Perfume Bottle above Cushions.

Element 19 Gold Frame. Resized to 30%. Bottom right behind lillies.

Element 4 Sand Hill. Resized to 20%. Bottom right above Perfume Bottles behind tube.

Element 9 Lantern. Resized to 65%. Position left of image above Sand Hills.

Element 24 Yellow Floral. Resized to 45%. Place behind tube layer above lantern. Duplicate. Mirror the copy and move to bottom far left of image.

Element 53 Pink Floral. Resized to 45%. Position bottom left above yellow florals. Behind tube layer.

Element 6 Butterfly. Resized to 45%. Mirror. Far left behind yellow floral. Above lantern.

Element 58 Tiger. Resized to 55%. Place on the left behind lantern.

Element 20 Lillies. Resized to 40%. Mirror. Place far left behind tiger.

Element 16 Spiral Sparkle. Resized to 45%. Position bottom left above florals and lantern. Duplicate and move copy to top right of image.

Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo

Tag by Silvia 

FTU Photographs

This tutorial was written by myself. This tag is my own idea and creation.

Any similarity to any other tutorial or tag is co incidental.

Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed

Ftu scrap kit - Memory Maker by MizTeeque  Here

Tube. I have used Cute Photographer 3 from VeryMany  Here

Mask 535 by Weescotslass Creations
My template #62   Here

Filters Used

Eyecandy - Chrome

Tramages - Mo Jellyfish

Open template, shift D to duplicate. Close original.

Delete credits, layer 4 and word art layers.

Go to layer palette...

Layer 1. Selections - Select all - Float. Copy/paste paper of choice. I used paper 9 resized to 50%. Selections  - Invert - Delete. Select none and delete template layer. D/shadow. Repeat for Layer 7.

Layer 2.  Selections - Select all - Float. Copy/paste paper of choice. I used paper 10 resized to 70%. Selections - Invert - Delete. Select none and delete template layer.  Apply Tramages - Mo Jellyfish . Tile -100 Offset -173 Shading-132. D/shadow.

Layer 3. Selections - Select all - Float. Copy/paste paper of choice. I used paper 3 resized to 50%. Selections - Invert - Delete. Select none and delete template layer. Apply Mo Jellyfish, settings as before. D/shadow. Duplicate layer and change blend mode of top copy to screen.

Layer 5. Selections - Select all - Float. C/paste a close up of your tube and position to your liking. Selections - Invert - Delete. Select None.Working on Close up, go to Effects - Photo Effects - Sepia Toning - Amount to age - 75.

Layer 6. Apply EyeCandy - Chrome. Settings below. D/shadow.

Layer 7. See Layer 1.

Layer 8. From kit choose 4 of the word art elements and resize to 25%.  Place them over each of the 4 boxes on the temp layer. To help with positioning so that they are all vertically straight, line the left edge of each word art against the right edge of layer 7. 

Merge all 4 layers and D/shadow. Go back to original temp layer and change the blend mode of the boxes to Screen.

Now C/paste, position and d/shadow your tube.

Continue by adding desired elements from kit to your tag. D/shadow as you go.

I used....

2 Camera. Resized to 40%. Bottom left of image behind tube layer.

4 Paper Flower. Resized to 50%. Centre of image, above layer 3. Behind close up.

25 Leaves. Resized to 50%. Apply Sepia toning that we used on the close up layer. Position bottom right of image behind tube layer. Duplicate and mirror copy to left. Merge down. D/shadow. Duplicate again and change blend mode of top copy to hard light.

8 Paper butterfly. Resized to 20%. Rotate left 21. Top left of tag above frame.

Mask layer. Paste paper of choice. I used paper 6. Resize to 80%. Load mask from disk. In layer palette delete mask and merge group. Duplicate mask layer and image - mirror. Merge layer down.

Open raster deform tool...(Its the pick tool in the version of Paintshop I use) Use raster deform tool to position and reduce the height and width of mask until your happy with how it looks.

Delete background layer of template.

Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo

Tags By Sylvia 

Tag Templates 61 & 62

 HERE

HERE

I did say I was already thinking of Autumn !.. I just love autumn colours and tags. So I couldn't resist having a play with these and a wee bit of autumnal tube shopping of course :)

Tube - Misticheskaya

Scrap kit - Bibi's Collection - Autumn Music

Temp Fonts - Impact & Milasian Circa 

Tube - Vadis 

Scrap Kit - Pink Paradox Productions - Autumn Comfort

Temp Font - Corporea

2 Beautiful Tags By Silvia

Tag Showcase

A collection of beautiful tags sent to me from Silvia in Berlin. All created using my templates and tutorial. ..As you can probably guess..like me she is a huge fan of Verymany tubes...Great Job Silvia !!