Tuesday 22 August 2017

FTU Mirror Mirror

This tutorial was written by myself. This tag is my own idea and creation.
Any similarity to any other tutorial or tag is co incidental.
Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed
Ftu Scrap kit 'Sweet Gothic Pirates' by GOFDesigns  HERE
Side facing Tube. I have used the beautiful artwork of Laguna available to purchase at Pics For Design  (you will need to obtain a licence)
Word Art by Me (optional) If you would like to use it  HERE
Mask of choice. I used Mask Wsl 414 by Chelle  HERE
Font Used - Pirata One.

Filters Used
EyeCandy4000 - Gradient Glow and Shadowlab.

Open a new image 700x700.
From kit c/paste element 54 Oval resized to 80%. Centre of canvas.
C/paste element 88 Rose cluster resized to 80%. Position top centre, behind Oval.
Duplicate. Image - Flip copy to bottom centre, again behind Oval.
Duplicate bottom copy. Rotate right by 90 degrees. Position on the left side behind Oval.
Duplicate this copy and Image - Mirror to the right. 
4 copies in total.
In layer palette move  the top and bottom copies above the left/right side copies.
When happy with placement merge all 4 layers.
Apply Eyecandy - Gradient glow. 
Color - White - Thin.




Then apply a Shadow. I used Eyecandy - Shadowlab 
Settings below.
Once applied, repeat but change the offset direction to 135.



C/paste and position your tube to left of your image. Above Oval layer.
Now go back to your Oval layer. Using magic wand tool click in the centre to float the black inner. Duplicate your tube and resize to 85%. Move behind original tube layer.
Position within the floating selection so that it resembles a reflection. 
Go to Selections - Invert - Delete. Select None.
Change blend mode of tube copy to Luminance Legacy. Duplicate and change blend mode of this copy (top copy)  to screen.
Go back to your original tube layer and shadow.

Lets add some elements. d/shadow as you go. On certain elements I used Eyecandy Shadowlab ( settings as before only no repeat/direction change) 

91 Open Book - 50%. Bottom of tag above tube layer. Once positioned use eraser tool to remove any Rose Cluster that shows beneath the book.

99 Crow - 30%. Sit on/above the book layer.

94 Candelabra - 50%. Place behind book/crow/tube layers. Shadowlab.

111 Book Stack - 40%. Bottom right behind candelabra. Shadowlab.

75 Mouse - 30%. Adjust - Hue & Saturation - Colorize. Both set at 0. Position on top of book stack.

70 Roses - 40%. Adjust - Hue & Saturation - Colorize - Hue 130 Saturation 255. Duplicate. Change blend mode of top copy to Screen. Merge layer down. Place bottom right of image, behind open book above book stack. Duplicate, position copy a little further up behind crow.

17 Sparkle - 50%. Position above the Oval behind the tube layers.

42 Cobweb - 25%. Duplicate - blend mode Screen on top copy, merge down. Place bottom right behind book stack. Duplicate and Image - Mirror copy to left. Move up slightly.

C/paste the Word Art and position bottom left.

Mask Layer - Paper 9 resized to 95%. Go to layers - Load mask from disk. In layer palette, delete mask and merge group. 

Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo



Wonderful version of Mirror Mirror by Patty.





Beautiful tag by Silvia

Tuesday 15 August 2017

FTU La Bella Vita

This tutorial was written by myself. This tag is my own idea and creation.
Any similarity to any other tutorial or tag is co incidental.
Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed
Ftu Scrap kit ' Bellissimo Vita' by Elli's Creations  HERE
Tube of choice.
I have used 'Nicole' by Toriya at  ScrapsNCompany
Font Used - Matchbox

Filters Used
Xero - Simplicity
Mura's Meister - Copies

Open a new image 700x700.
From kit, copy/paste element 36 Window in the centre of canvas and resize to 65%.
Behind this layer C/paste and position Element 35 Masked Image. Resize to 55%. Duplicate layer and merge down. Go back to Window layer, D/shadow and merge down.

C/paste Element 15 Flower. Resize to 50%. Apply Mura's Meister - Copies - Encircle. Settings below.



Position behind Window layer. Slightly off centre to the left of canvas. Refer to my Image as a guide. Duplicate and Mirror copy to the right. Merge these 2 layers and apply Xero - Simplicity. Settings below.


C/paste Element 4 Column. Resize to 50%. Position on the left of canvas above Encircle layer behind Window layer. Duplicate and mirror copy to right. Again refer to my image. Merge both Column layers. D/shadow.

 C/paste, position and d/shadow your chosen tube.

Continue to add desired elements from kit to build up your tag. D/shadow as you go.
I used...

62 Branches. Resized to 40%. Position left above Column, behind Window. Duplicate and Mirror copy to right.

8 Jug. Resized to 30%. Bottom Left. Above Window layer. Behind tube.

22 Herb Pot. Resized to 30%. Image - Mirror. Bottom left above Jug behind tube.

58 Cat. Resized to 25%. Image - Mirror. Bottom left above Herb Pot, behind tube layer.

32 Butterfly. Resized to 40%. Position on left above Branches.

3 Grapes. Resized to 20%. Bottom right above tube layer.

30 Book. Resized to 40%. Bottom of tag above tube layer.


Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo


Tag by Silvia


Tuesday 8 August 2017

Tag templates 63 & 64






Tags I made with these templates. 

Tube 'Brenda' by Alehandra_Vanhek  at PFD
Kit 'Autumn is here' by Elli's Creations
 Template Font - Atlantic Cruise



Tube 'Eva' by Grafik at PFD
Kit 'Golden days of autumn' by GoldDust
Template Font - Copasetic


2 wonderful tags by Silvia



Beautiful tags by Rhonda



Friday 4 August 2017

FTU AUTUMN DAYS



This tutorial was written by myself. This tag is my own idea and creation.
Any similarity to any other tutorial or tag is co incidental.
Please read my tutorial basics (located top left sidebar) before you begin.

Supplies Needed
Ftu scrap kit 'Autumn day' by Zaza @  Scrap And Tubes
Tube of choice. I have used the wonderful artwork of Kajenna @ Pics For Design
Word art by me HERE
Font used Atlantic Cruise.

No filters.
Open a new image 700 x 700.
From kit copy/paste element 14 Frame resize to 60%.
Using magic wand tool click in centre to float the inner.
Selections - Modify - Expand by 3.
C/paste  Paper 1 resize to 50%. Move behind frame in layer palette.
Selections - Invert - Delete. Select none.
Go back to frame. Duplicate. Change blend mode on top copy to Multiply then merge layer down. D/shadow the frame then merge down with paper layer.

C/paste and position your tube at this point. It will help with the placement of the elements. I positioned slightly off centre more toward the left of the frame.

From kit C/paste Element 16 Red Flower. Position behind the frame bottom right of the canvas. Duplicate and mirror copy to the left. Merge down and d/shadow.
Behind this layer C/paste Element 49 Wreath resized to 50%.
Position bottom left of canvas. Slightly lower than previous layer. Again duplicate. Mirror copy to right and merge down.

C/paste element 46 yellow flower cluster. Resize to 50%. Position behind the frame at the top right of the canvas. Duplicate. Mirror the copy to left. Duplicate again and place the third copy top centre in between the other copies. Merge all 3. 
C/paste the word art and position above this layer.

C/paste Element 9 Flowers/basket. Resize to 50%. Position on the left above the frame, behind your tube. Duplicate mirror copy to right. Merge down. D/shadow.

C/paste Element 41 Birdhouse. Resize to 80%. Place on the right above Flower/basket, behind tube layer. D/shadow. On top of the Birdhouse sit Element 23 Bird resized to 25%. Mirror. D/shadow.

Bottom right of canvas above the Birdhouse c/paste Element 27 Berries. D/shadow.
Then above this layer still bottom right of the canvas place element 15 Mushrooms resized to 50%. D/shadow.


Place Element 17 Branches centre of canvas behind your tube.

Element 24 Acorns resized to 25%. Position bottom left above tube layer.

Merge all layers. Crop to your liking. I usually sharpen at this point rather than each separate element as I go along. Adjust - Sharpness - Unsharp Mask 5.0 - 30 -5.
Add name and relevant artist copyright and tube licence info.
Save as Png.
Thank you for stopping by and trying this tutorial. I hope you are pleased with your tag. Sal xoxo





Cute Tag by Silvia

Another Cutie..This one is by Linda. 




And this kitty cutie is by Patty


Thursday 3 August 2017

New tutorial from Rhonda 'You give me fever' ptu

Awesome new tutorial from Rhonda @ Rhonda's Rockin' Designz.
Created using my template #58

Click HERE to find this and many other fantastic tuts from Rhonda.

Related Posts Plugin for WordPress, Blogger...